Care and Maintenance of Tin Ware
Reproduction tinware is very similar to that which was made and used during the 18th and 19th centuries. One must be careful not to allow these items to sit on a fire for any length of time at all without any liquid in them, or to boil dry, as the heat from the fire will cause the solder in the joints to melt. This will cause either leakage or the vessel will come apart entirely. For example, coffee pots should be filled almost to the top of the spout hole with liquid, and when the level falls below half full, they should be removed from the fire.
If tin ware is left wet, or even the least bit damp, any place where the tin coating is scratched or cut will rust. This marring can be caused by using metal utensils; therefore we recommend the use of wooden utensils with your tin ware. Also, tin ware items should not be left sitting for any long periods of time with liquid in them.
Tin ware articles should be washed and thoroughly dried after each use and which can be accomplished easily by placing them in a low temperature oven for approximately 30 minutes. However, when cleaning your tin ware, do not scrub it with anything abrasive on either the inside or the outside which can remove the tin plating and cause rusting.
Another trick in helping to keep your utensil from rusting is to apply a light coating of oil after drying. Acidic drinks such as citrus juices, carbonated colas, Kool-aid and similar drinks will eat through the tin coating, which will cause everything to have a bad taste as well as contributing to further rusting.
When packing your gear, pack your tin ware in dry towels, clothing or blankets in order to protect it. Another good solution is to have a lightweight canvas bag for each item to protect from scratches and dents, thus ensuring that it will serve you well for many years.